EN 14314: Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification

Standard: EN 14314: Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification 

 Certification: CE Marking

Factory made phenolic foam (PF) products for building equipment and industrial installation should meet the requirements as described in the standard EN 14314, which is a harmonized standard under the Construction Products Regulation (EU) 305/2011.

Scope: This European Standard specifies the requirements for factory made phenolic foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately - 200 °C to + 120 °C.

Below an operating temperature of - 50 °C, special tests regarding the suitability of the products in the intended application are advised (e.g. liquefaction of oxygen). Manufacturer's advice should be heeded in all cases.

The products are manufactured in the form of blocks, faced or unfaced, boards, pipe sections, segments and prefabricated ware.

This European Standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.

Products covered by this standard are also used in prefabricated thermal insulating systems and composite panels; the performance of systems incorporating these products is not covered.

This European Standard does not specify the required level of a given property that should be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender.

Products with a declared thermal conductivity greater than 0,050 W/(m·K) at 10 °C are not covered by this standard.

This European Standard does not cover products for in situ-insulation (blowing or pouring) or products for the insulation of the building structure.

This European Standard does not cover the following acoustical aspects: direct airborne sound insulation and impact noise transmission index.

Related Standards:

• EN 13172: Thermal insulation products — Evaluation of conformity
• EN 13501-1: Fire classification of construction products and building elements — Part 1: Classification using data from reaction to fire tests.
• EN 13823: Reaction to fire tests for building products — Building products excluding floorings exposed to the thermal attack by a single burning item
• EN 12667: Thermal performance of building materials and products — Determination of thermal resistance by means of guarded hot plate and heat flow meter methods — Products of high and medium thermal resistance.
• EN 12939, Thermal performance of building materials and products — Determination of thermal resistance by means of guarded hot plate and heat flow meter methods — Thick products of high and medium thermal resistance

Insulation Testing Solutions

Intertek provides Insulation Testing services for performance and environmental determining the level of fire resistance and energy efficiency of your materials

Learn More